Resource MAP File (SCI)

The SCI Resource MAP File

 

 

Description

The SCI Resource MAP File, usually named "RESOURCE.MAP" contains a lookup table for the individual resources.

Versions

SCI0 resource.map

The SCI0 map file format is pretty simple: It consists of 6-byte entries, terminated by the sequence 0xffff ffff ffff. The first 2 bytes, interpreted as little endian 16 bit integer, encode resource type (high 5 bits) and number (low 11 bits). The next 4 bytes are a 32 bit LE integer that contains the resource file number in the high 6 bits, and the absolute offset within the file in the low 26 bits. SCI0 performs a linear search to find the resource; however, multiple entries may match the search, since resources may be present more than once (the inverse mapping is not injective).

SCI1 resource.map

The SCI1 resource.map starts with an array of 3-byte structures where the 1st byte is the resource type (0x80 ... 0x91) and next 2 bytes (interpreted as little-endian 16 bit integer) represent the absolute offset of the resource's lookup table (within resource.map). This first array is terminated by a 3-byte entry with has 0xFF as a type and the offset pointing to the first byte after the last resource type's lookup table. SCI1 first goes through this list to find the start of list for the correct resource type and remember this offset and the offset from the next entry to know where it ends. The resulting interval contains a sorted list of 6-byte structures, where the first LE 16 bit integer is the resource number, and the next LE 32 bit integer contains the resource file number in its high 4 bits and the absolute resource offset (in the indicated resource file) in its low 28 bits. Because the list is sorted and its length is known, Sierra SCI can use binary search to locate the resource ID it is looking for.

Also See

• MAP Files in the SCI Specifications
• SCI Resources in the SCI Specifications